Titanium tube
Material：Pure titanium, titan
Grade：TA1、TA2、TA3、TC4、TA9、TA10、TA18
thickness：0.3mm - 80mm
width：2m - 10m
height：<9m
certificate：ISO 9001
standard：GB/T3624 GB/T3625 ASTM B338 ASTM B862 ASTM B865
Titanium tube
|
Grade |
Manufacturing process |
delivery status |
specification（thick×width×long/mm） |
Executive Standard |
|
|
TA1 |
Cold rolled |
M |
Ф5-110×1.0-4.5×2000-9000 （Cold rolled titanium seamless tube） Ф110以上×1.0-8.0×1000-2000 （Titanium welded tube） |
GB/T3624-2007 |
|
|
TA2 |
GB/T3625-2007 |
||||
|
TA9 |
ASTM B337 |
||||
|
TA10 |
ASTM B338 |
||||
|
TC4 |
Hot forging |
M |
Ф15以上×5.0以上×1000以內 |
GB/T2965-2007 ASTM B348 |
|
A reference standard
1. GB 228 Metal tensile test method
2. GB 224 metal pipe hydraulic test method
3. GB 226 metal tube flattening test method
4. GB/T3620.1 titanium and titanium alloy grades and chemical composition
5. GB/T3620.2 Titanium and titanium alloy processed products chemical composition and composition tolerance
Two technical requirements
1. The chemical composition of titanium and titanium alloy pipes shall comply with the provisions of GB/T3620.1. When the buyer retests, the allowable deviation of the chemical composition shall comply with the provisions of GB/T3620.2.
2. The allowable deviation of the outer diameter of the pipe shall comply with the provisions in Table 1.
3. The allowable deviation of the pipe wall thickness should not exceed ±12.5% of its nominal wall thickness. The allowable deviation of the pipe wall thickness does not apply to the weld of the titanium welded pipe.
4. The length of the pipe shall comply with the requirements in Table 2.
5. The length of the fixed length or double length of the pipe should be within its indefinite length. The allowable deviation of the fixed length is +10mm. The length of the double length should also be included in the cut amount when the pipe is cut. Each cut should be 5mm.
|
鈦管材外徑的允許偏差（mm） |
||||||
|
外徑 |
3~10 |
>10~30 |
>30~50 |
>50~80 |
>80~100 |
>100 |
|
允許偏差 |
±0.15 |
±0.30 |
±0.50 |
±0.65 |
±0.75 |
±0.85 |
表二
|
管材的長度（mm） |
||||
|
鈦無縫管 |
外徑 |
≤15 |
不定尺長度 |
500~400 |
|
15 |
500~900 |
|||
|
鈦焊接管 |
壁厚 |
0.5~1.25 |
500~1500 |
|
|
1.25~2.0 |
500~6000 |
|||
|
鈦焊接-軋制管 |
壁厚 |
2.0~2.5 |
500~4000 |
|
|
0.5~0.8 |
500~8000 |
|||
|
>0.8~2.0 |
500~5000 |
|||
